Neutrino® LC/CZ 19-290

FLIR Neutrino® Integrated Solutions

Go to Product Support
product image

FLIR is now offering Neutrino Integrated Solutions – Our best MWIR cooled camera cores now with FLIR’s own zoom lenses, a cost-effective solution with superior performance and faster time to market. FLIR zoom lenses and cameras are designed together to guarantee a simplified opto-mechanical integration and user interface. The Neutrino LC/CZ 19-290 solution provides a SWaP optimized, 19-290mm continuous zoom lens precision integrated with the Neutrino LC camera core. With a common and simplified user interface, the Neutrino LC/CZ 19-290 provides smooth, 15X continuous zoom covering a 1.9° to 27° FOV range. It is fully athermalized over a wide operating temperature range and is auto focus capable.

  • Complete MWIR Solution

    Simplified product development and manufacturing enables faster time to market.

  • Seamless Opto-mechanical Integration

    Designed from the ground up for optimum performance and compatibility.

  • Market Leading Thermal Optics

    Integrated SWaP optimized lens provides instant clear imaging able to withstand rugged environments in the air or on the ground.

Size (L x W x H)
15.75 x 7.84 x 10.01 cm (6.21 x 3.09 x 3.94 in)
Spectral Band
3.4 - 5.1 µm Standard
Thermal Imager
640 x 512, (15 µm pitch) HOT MWIR
735 grams
Connections & Communications
Discrete I/O Controls Available
Primary Electrical Connector
80-pin Hirose (camera), 4-pin Molex (cooler), 6-pin Molex (lens)
RS-232 Compatible Communication
RS-232, Nominal 38400 Baud
User Configurability via SDK & GUI
Yes, Camera only.
Environmental & Approvals
5% to 95% non-condensing
Non-Operating Temperature Range
-57° C to + 80° C
Operating Temperature Range
-35° C to + 70° C, note this is limited by the lens
Operational Altitude
12km altitude equivalent
40g w/11ms half-sine pulse, 3-axis
5.8grms, 3-axis, 1hr each
FPA Control
Direct Injection Snapshot Prog operation
Programmable Integration Time
Yes (0.01 ms - 16.6 ms)
ROIC Modes
Free run, readout & integration priority
Imaging & Optical
Analog Video Display Format
Yes, accessory board required
BT656 (8-bit)
Yes, accessory board required
Camera Link [16_bit or 8_bit]
Yes, accessory board required
CMOS [16_bit or 8_bit]
CMOS (16-bit, 16-bit color encoded YCbCr, 8-bit)
Color and Monochrome Palettes (LUTs)
Continuous Zoom (digital and analog)
Optical Zoom (lens) and Electronic Zoom (camera)
FEL_Zoom Range [mm]
19.5 - 290 mm (±5%) compact, continuous zoom lens
Full Frame Rate
60Hz, adjustable 1Hz to 60 Hz
Horizontal Field of View [HFOV]
1.87° to 27.36° (actively athermalized over the operating temperature range)
Image Optimization - AGC
Histogram Equalization, DDE+
Invert/Revert (analog and 8-bit digital)
Invert/Revert (Yes)
LVDS [16_bit or 8_bit]
NTSC/PAL (field switchable)
Yes, accessory board required
Polarity Control [black hot & white hot]
Sensitivity [NEdT]
< 30mK
Special Features
Active athermalization and auto focus capable
Time to Image
< 4min room temp
Zoom and Focus Controls
Input Power
3.3VDC (camera), 12VDC (cooler), 12VDC (lens)
Input Power with Lens
4.75-6.0 VDC Camera, 9-35 VDC Cryocooler
Power Dissipation
<4.5 W (camera/cooler) steady state <1.92 W (lens) steady state <12.0 W (camera/cooler) peak power <3.6 W (lens) peak power
Power Dissipation with Lens
<8 W cooldown, <5 W Steady State
Related Documents
Export Restrictions

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

FLIR Neutrino® Integrated Solutions