Support Center
FLIR A615
For Support
Please
click here for support
For Service
Call 0049 69-950090 0
or
Submit RMA
Overview:
Technical Guidance
How does the vertical sync frequency vary with the requested frame rate of the FLIR A615/A655?
Read the Story
Trouble Shooting
My camera suddenly shows a blue screen or a checkerboard pattern instead of a live image. What is wrong?
Read the Story
Registration
I'm trying to register my FLIR product but I recieve an error that the serial number is not found. What is the reason?
Read the Story
Configuration
My Ethernet camera (FLIR A3x0/A3x5/A6x5/Ax5) in FLIR Tools does not display a live image but instead shows a rainbow-colored image. How do I fix this?
Read the Story
Calculations
What is the typical spectral response for certain camera/lens combination?
Read the Story
Instructions
Does FLIR offer an SDK to control and get video stream from the FLIR IR cameras?
Learn moreResources:
Specifications
Overview
- Housing material
- Aluminium
- IR Resolution
- 640 × 480 pixels
- Contents
- Hard transport case or cardboard box, Thermal imaging camera with lens, Utility CD-ROM, Calibration certificate, Ethernet™ cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera)
Connections & Communications
- Digital I/O connector type
- 6-pole jackable screw terminal
- Digital I/O isolation voltage
- 500 VRMS
- Digital I/O supply voltage
- 12/24 VDC, max 200 mA
- Digital input purpose
- Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read)
- Digital Inputs
- 2 opto-isolated, 10–30 VDC
- Digital Output Purpose
- Output to ext. device (programmatically set)
- Digital Outputs
- 2 opto-isolated, 10–30 VDC, max 100 mA
- Ethernet
- Control and image
- Ethernet Communication
- TCP/IP socket-based FLIR proprietary and GenICam protocol
- Ethernet Connector Type
- RJ-45
- Ethernet Image Streaming
- 16-bit 640 × 480 pixels at 50 Hz, 16-bit 640 × 240 pixels at 100 Hz, 16-bit 640 × 120 pixels at 200 Hz (Signal linear, Temperature linear, Radiometric GigE Vision and GenICam compatible)
- Ethernet Protocols
- TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
- Ethernet Standard
- IEEE 802.3
- Ethernet Type
- Gigabit Ethernet
- USB
- Control and image
- USB - Communication
- TCP/IP socket-based FLIR proprietary
- USB - Connector Type
- USB Mini-B
- USB - Image Streaming
- 16-bit 640 × 480
- USB - Protocols
- TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
- USB - Standard
- USB 2 HS
Environmental
- Atmospheric transmission correction
- Automatic, based on inputs for distance, atmospheric temperature and relative humidity
- EMC
- EN 61000-6-2:2001 (Immunity), EN 61000-6-3:2001 (Emission), FCC 47 CFR Part 15 Class B (Emission)
- Emissivity Correction
- Variable from 0.01 to 1.0
- Encapsulation
- IP 30 (IEC 60529)
- Humidity (Operating and Storage)
- IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (77 to 104°F)
- Operating Temperature Range
- –15°C to +50°C (+5°F to +122°F)
- Shock
- 25 g (IEC 60068-2-27)
- Storage Temperature Range
- –40°C to +70°C (-40 to 158°F)
- Vibration
- 2 g (IEC 60068-2-6)
Imaging & Optical
- Camera size excl lens (L x W x H)
- 203 × 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
- Detector Pitch
- 17 µm
- Detector Time Constant
- Typical 8 ms
- f-number
- 1.0
- Focus
- Automatic or manual (built in motor)
- Image Frequency
- 50 Hz (100/200 Hz with windowing)
- Lens Identification
- Automatic
Measurement & Analysis
- Accuracy
- ±2°C or ±2% of reading
- External Optics & Windows Correction
- Automatic, based on input of optics/window transmission and temperature
- Measurement Corrections
- Global object parameters
- Object Temperature Range
- -20 to +150°C +100 to +650°C +300 to +2000°C
- Optics Transmission Correction
- Automatic, based on signals from internal sensors
- Reflected apparent temperature correction
- Automatic, based on input of reflected temperature
- Thermal Sensitivity/NETD
- < 0.05°C @ +30°C (86°F) / 50 mK
Power
- External Power Connector Type
- 2-pole jackable screw terminal
- External Power Operation
- 12/24 VDC, 24 W absolute max
- Voltage
- Allowed range 10–30 VDC
