Remote Rail Safety Monitoring Camera

ThermiCam Rail

Model: FLIR ThermiCam Rail BPL 690s
Go to Product Support
product image

ThermiCam Rail is an integrated thermal camera and detector for obstacle detection in a public transportation environment. ThermiCam Rail does not need light to operate, but sees the thermal energy emitted from obstacles. This enables the sensor to detect vehicles, people and large animals in the darkest of nights, over a long range and in the most difficult weather conditions. The result is reliable, 24/7 detection for a wide range of applications.

Reliable Rail System Safety Monitoring

  • Platform, Tunnel and Track Safety

    ThermiCam Rail is a cost-effective solution for detecting people falling off platforms, entering tunnels, and walking on rail lines.

  • Level Crossing Obstacle Detection

    Prevent collisions by detecting vehicles that are stuck at rail crossings and blocking the passage of an approaching train.

  • Integration with Third-Party Systems

    ThermiCam Rail sensors are managed by the centralized FLUX software, which allows you to manage all fielded sensors locally, including configuring their detection zones.

H.264, MPEG-4, MJPEG (dual stream)
Detection Functionalities
Vehicle, person and animal detection
Vertically mounted: 45 x 16 x 12cm Horizontally mounted: 41 x 18 x 12cm
Focal Length
7.5 mm
Vehicle, person, and animal detection
Long wave Infrared (7 – 14 µm)
Distance (vehicle presence)
0 - 35 m
Detection Zones
1 vehicle stop detection zone 2 people and animal detection zones
Connections & Communications
For communication of output state events, configuration & monitoring (streaming video)
Electrical & Mechanical
Contact Closures
3 for ETH versions, direct or via optional ETH interface (PN 10-6075) 16 for BPL versions, via TI x-stream BPL (PN 10-6085)
Environmental & Approvals
EU Directives
EMC 2014/30/EU
FCC part 15 Class A
IP Rating
IP66 & IP67
Protection Grade
Housing = IP68, Connectors = IP67
RoHS 2011-65-EU
0-95% relative
Temperature Range
–34° to +80°C (–29° to 165°F)
Imaging & Optical
Field of View
90° x 69°
Frame Rate
30/9 FPS
640 x 480
Current Consumption
< 150mA @ 24VDC (< 200mA @ 24VDC peak at start-up)
Input Power
12-42VDC, 12-30VAC
Power Consumption
≤ 3,6W (≤ 4,8W peak at start-up)
Contact Sales

Want more information on this product?

Call +32 495 11 30 10 to speak with a knowledgeable specialist.

Related Documents
Export Restrictions

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

ThermiCam Rail - Model: FLIR ThermiCam Rail BPL 690s

Change Selection