All-Purpose Radionuclide Identification Device

identiFINDER R400

Model: identiFINDER R400 LG

Go to Support Page

With over 20,000 devices deployed globally, the FLIR identiFINDER R400 is the most widely deployed handheld radionuclide identification device (RID) in the world. It is used to detect, locate, measure, and identify radioactive sources and produces rapid visible, audible, and tactile alerts that expedite response measures. The identiFINDER R400 provides operators the ideal balance of size and weight for a wide variety of monitoring scenarios including all-purpose surveying, emergency response, and environmental monitoring.

Product Variations:

Detect, Locate, Measure, and Identify Radioactive Sources

Gamma and Neutron Detection

NaI detector enables rapid isotope identification (ANSI N42.34 library) for threat determination; GM detector provides dose rate and total dose
Common Operating Interface

Large display provides visual alarm confirmation and ability to view advanced spectral data; self-explanatory buttons provide easy, one-handed operation
Advanced Communications

Like other identiFINDER products, the R400 contains on-board Bluetooth, web server, and GPS technologies

Specifications

System Overview

Data Storage: 2GB internal memory; up to 600,000 spectra

Training Requirements: < 10 mins for operator; 1 day for advanced user

Environmental

Operating Humidity: 10 to 80%;

Operating Temperature: -4 to 122 °F(-20 to 50 °C)

Storage Temperature: 14 to 95 °F(-10 to 35 °C)

Other

Global Positionsing System [GPS] [removable]: 12-channel SiRF III receiver

Physical Features

Dimensions (L x W x H): ≤3.7 x 10.6 x 3.2 in (9.4 x 26.9 x 8.1 cm) -with battery

Weight: ≤3.2 lbs(≤1.5 kg)

Power

Battery Specs: Either rechargeable NiMH or 4x AA pack(supplied); ≥8h operational battery life; recharge ≤4h when using AC; recharge >4h when using USB

Cold Start Time: < 2 mins from cold start

Input Voltage: 100-240 VAC (wall and car adapters and USB cable supplied)

Sampling & Analysis

Nuclide Identification: According to ANSI N42.34

Sample Introduction: Absorption of EM gamma or neutron emissions

Sampling & Analysis: From a few seconds to minutes

Threats: Detects neutron or gamma radiation emitted from natural occurrences in the environment, special nuclear material, industrial, or medical material

System Interface

Software: On-board webserver software

Technology

Dose Range: 0 nSv - 1 Sv (0 nrem - 100 rem)

Dose Rate & Accuracy (Cs-137): 0 nSv/h - 10.00mSv/h (0 nrem/h - 1.0 rem/h); ±30 %

Energy Range [Gamma]: 20 keV - 3 MeV

Gamma [High Dose Rate]: Geiger-Mller

Gamma LaBr3: 1.2 x 1.2 in (30 x 30 mm)

Gamma Spectrum: 1024 channels; 3 MeV

Geiger-Muller Dose Rate Range: 100 µSv/h - 10mSv/h (10mrem/h - 1.0 rem/h)

Overload Dose Rate Range: 10 mSv/h - 1 Sv/h (1.0 rem/h - 100 rem/h)

Scintillator Dose Rate Range: 0 nSv/h - 500 µSv/h (0 nrem/h - 50mrem/h)

Service Interval: 5 year factorymaintenance

Stabilization: LED

Typical Resolution: 4.5 % FWHM at 662 keV

Accessories

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.