Science-Grade MWIR InSb Camera


Model: A6700 MWIR
Go to Product Support
product image

Designed for electronics inspections, manufacturing monitoring, scientific research, and non-destructive testing, the FLIR A6700 MWIR camera is ideal for high-speed thermal events and fast-moving targets. Short exposure times allow users to freeze motion and achieve accurate temperature measurements. In fact, the camera’s image output can be windowed to increase frame rates to 480 frames per second to accurately characterize even higher speed thermal events, helping ensure critical data doesn’t get missed during testing.

Contact Sales
  • Crisp Thermal Images

    FLIR A6700 operates in the 3.0–5.0 µm waveband (1.0–5.0 µm broadband option) and produces finely-detailed, 327,680 pixel images.

  • Fast Integration Times

    Snapshot mode lets you capture every pixel from a scene simultaneously, which is crucial to measuring temperatures of fast-moving objects.

  • Standard Video Interfaces

    Gigabit Ethernet and analog video are simultaneously active yet independently controlled allowing greater flexibility for recording and display purposes.

Contact Sales

Want more information on this product?

Call 0049 69-950090 0 to speak with a knowledgeable specialist.

Dynamic Range
Integration Time
480 ns to ~full frame
Optional Temperature Range [with band matched optics]
45°C to 600°C/113°F to 1112°F (ND1); 250°C to 2000°C/482°F to 3632°F (ND2); 500°C to 3000°C/932°F to 5432°F (ND3)
Pixel Size [Square]
15 µm
24 VDC (<24 W steady state)
640 × 512
Size [L x W x H ] w/o Lens
226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in.)
Standard Temperature Range [with band matched optics]
-20°C to 300°C (-4°F to 572°F)
Weight [without lens]
2.3 kg (5 lbs)
Connections & Communications
Command and Control
GenICam (GigE)
Synchronization Modes
Sync In
Environmental & Approvals
Operating Temperature Range
-20°C to 50°C (-4°F to 122°F)
2 × ¼" -20 tapped holes, 1 × 3/8"-16 tapped hole, 4 × 10-24 tapped holes
Imaging & Optical
Available Lenses
25 mm, 50 mm, 100 mm
Camera f-number
Close-up Lenses/Microscopes
No microscopes available
Detector Type
FLIR indium antimonide (InSb)
Filter Holder [Warm]
Behind lens mount for standard 1 inch diameter filters
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 60 Hz
Image Time Stamp
Lens Interface
FLIR FPO (4-tab bayonet)
On Camera Image Storage
≥99.8% (≥99.95% typical)
Fixed configuration, can be turned off
Selectable 8-bit
Pixel Clock
50 MHz
Radiometric Data Streaming
Gigabit Ethernet (GigE Vision)
Readout Modes
Asynchronous integrate while read; asynchronous integrate then read
Readout Type
Spectral Range
1.0 – 5.0 µm
Standard Video
Standard Video Zoom
Automatic, variable
Subwindow Modes
Full, half, and quarter window
Video Modes
SDI: 720p@50/59.9, 1080p@25/29.9
Measurement & Analysis
Ambient Drift Compensation [with factory cal]
Measurement & Analysis
Automatic Gain Control
Manual, Linear, Plateau equalization, DDE
Sensor Cooling
Closed-cycle rotary
40 g, 11 msec ½ sine pulse/4.3 g RMS random vibration, all 3 axes
Thermal Sensitivity_NETD [typical]
≤25 mK typical
≤100°C (≤212°F), ±2°C (±3.6°F) accuracy (±1°C/1.8°F typical); >100°C ±2% of reading (±1% typical)
Thermal Imaging
Export Restrictions

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

FLIR A6700 MWIR - Model: A6700 MWIR

Change Selection