Extech 480826

Triple Axis EMF Tester

480826 Triple Axis EMF Tester is designed to provide a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, electrical appliances and industrial devices. Provides Three axis (X, Y, Z direction) electromagnetic field measurement. Calibrated to measure EMF radiation at wide bandwidths from 30 Hz to 300 Hz. Complete with sensor with 3 ft. (930 mm) cable, 9V battery, and hard carrying case.

Extech 480836

RF EMF Strength Meter

This RF EMF Strength Meter monitors high frequency radiation in the 50MHz to 3.5GHz range. Ideal for mobile phones, cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF"Electrosmog" detection, and microwave leakage. It features non-directional measurement with 3-channel (triaxial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9V battery and carrying case.

Extech 480846

8GHz RF Electromagnetic Field Strength Meter

The Extech 480846 RF EMF Strength Meter monitors high frequency radiation in the 10 MHz to 8 GHz range. Ideal for mobile phones, cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF "electrosmog" detection, microwave leakage, and wireless communication applications (CW, TDMA, GSM, DECT). This meter features non-directional measurement with a 3-channel (triaxial) measurement probe, max hold and average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9 V battery and carrying case.

Extech 601100

Flat Surface pH Electrode

The Extech 601100 is a PVC-bodied, easy-to-clean, flat surface pH electrode. The product is ideal for solid products with minimal moisture like cheese, soils, or electrophoretic/agar gels. Includes 99 cm cable with BNC connection.

Extech 60120B

Mini pH Electrode (10x120mm)

The Extech 60120B is a pH Electrode. This electrode fits virtually any pH meter that accepts a BNC connector. Features a 0°C to 80°C operating temperature, 0 pH to 14 pH range, and a glass pH sensing bulb surrounded by protective teeth.

Extech 601500

Standard pH Electrode (12 x 160mm)

The Extech 601500 is a Standard pH Electrode and BNC combination. This electrode includes a long 1 m (39 in) cable for hassle free use, BNC connector, and storage solution bottle. Product has a 6 month warranty.

Extech 6015WC

Waterproof pH Electrode for Palm pH

The Extech 6015WC is a Waterproof pH Electrode for use with the PH220-C Waterproof Palm pH Meter. Features an automatic temperature compensation via the built in Pt-100 Ohm sensor, and comes with a 1 m (39 in) cable. Comes with a six month warranty.

Extech 650470

Tripak Dry Powder Buffer Capsules (4, 7 and 10pH)

The Extech 650470 is a set of Tripak Dry Powder Buffer Capsules. It provides convenient calibration solutions in capsules for pH meters. Includes 3 vials (10 capsules each) of 4 pH, 7 pH, and 10 pH dry powder buffers as well as one dispenser vial of color key preservative.

Extech 67500B

Redox ORP/Ref Electrode (13 x 154mm)

The Extech 67500B is a polycarbonate ORP electrode with a platinum sensing surface and a sealed reference. It is 13 mm by 154 mm long.

Extech 804010A

Polymer Conductivity Cell Probe

The Extech 804010A is a Polymer Conductivity Cell Probe. For use with the 341350A-P Oyster pH/Conductivity/TDS/ORP/Salinity Meter. It has a 1 m (39 in) cable length. Product comes with a six-month warranty.

Extech 850185

RTD Temperature Probe (30 to 220°C)

The Extech 850185 is an RTD stainless steel Temperature Probe. For use with the Oyster™ Series pH kits. The platinum RTD temperature sensor (100 Ohm) has a temperature range of 30°C to 220°C (86°F to 482°F).

Extech 850188

Thermistor probe (32 to 149°F)

The Extech 850188 is a stainless steel temperature probe with a 0°C to 65.0°C (32°F to 149°F) measuring range. Comes with a 6 month warranty. CE certified.

Extech 850190

Thermistor probe (32 to 194°F)

The Extech 850190 is a Thermistor Temperature Probe replacement for the 341350A-P conductivity meter. Featuring a 0°C to 90°C (32°F to 194°F) measuring range.

Extech BTL10

Battery Capacity Tester

The Extech BT100 is a Battery Capacity Tester. This product can be used to test the condition of batteries both quickly and easily. As an AC milliohm meter, the tester measures DC voltage and AC resistance while the battery is in use, helping to save time on repetitive testing trials or large quantities of batteries. Includes PC software for downloading readings to a PC.

Extech CL200

ExStik® Chlorine Meter

CL200 is an ExStik® Chlorine Meter. This revolutionary technique measures Direct Total Residual Chlorine from 0.01ppm to 10ppm. It makes non-subjective measurements unaffected by interferences associated with traditional colorimeters and spectrophotometers like sample color, turbidity, light, and pollutants. This product comes with an electrode, five packs of 10 reagent tablets (50 tests), a protective sensor cap, a sample cup with cap, four CR2032 batteries, and a 48” neck strap.

Extech CL203

ExTabTM Chlorine Reagent Tablets (10pk)

Extech CL203 are ExTab Chlorine Reagent tablets (10 pk-100 tests) for the CL200 Chlorine Meter. Foil packaging provides a very stable environment with a long shelf life. It comes with no messy powder reagents for hassle free calibration of your Extech meter. No dosing equipment is required.

Extech CL204

ExTab™ Chlorine Reagent Tablets (100pk)

Extech CL204 are ExTab Chlorine Reagent tablets (100pk-1000 tests) for the CL200 Chlorine Meter. Foil packaging provides a very stable environment with a long shelf life. It comes with no messy powder reagents for hassle free calibration of your Extech meter. No dosing equipment is required.

Extech CL205

ExStik® Replacement Chlorine Electrode Module

The CL205 is an Extech ExStik® Replacement Chlorine Electrode Module. Product for use with Extech CL200 Meter. The CL205 is an electrode capable of measuring chlorine and temperature. Comes with a 6 month warranty.

Extech CL207

Chlorine Standard

The CL207 is a Chlorine Calibration Standard for CL200 ExStik Waterproof Chlorine Meter. Product comes with 3 ampules.

Extech CTH10A

Radio-Controlled Wall Clock Hygro-Thermometer with Calendar

The CTH10A is an attractive wall clock features an oversized 109 mm (4.3 in) digit time display that can be easily view from a longer distance than regular sized clocks. It receives Time Code from NIST Radio Station WWVB and it automatically adjusts year, date, day, hour, minute, second, and Daylight Savings Time. In addition, it also measures Temperature and Relative Humidity! Perfect for desktop or wall mount display. This clock meter also features automatic adjust for daylight savings time (DST), programmable alarm clock with snooze feature, and a built-in stand for desktop or wall-mount. Complete with built-in stand and three C size batteries.

Extech DAT12

Bluetooth Datalogging Module

The Extech DAT12 is a replacement Bluetooth Data Logging Module for the MO55W and MM750W.

Extech DO210

Compact Dissolved Oxygen Meter

The DO210 is a Dissolved Oxygen Meter which measures DO from 0 to 20.0mg/L, Oxygen Percent from 0 to 100.0% and Temperature with ATC. This meter features Adjustable Altitude and Salinity Compensation as well as min, max and data hold functions. Complete with DO probe with membrane and 39" (1m) cable, two spare replacement membranes, electrolyte, 9V battery and soft case.

Extech DO600

Waterproof ExStik® II Dissolved Oxygen Meter

The ExStik® II DO600 meter displays Oxygen level as percent of Saturation from 0 to 200. 0 percent or Concentration from 0 to 20.00 ppm (mg/L). It features Adjustable Altitude Compensation (0 to 20,000 feet in 1,000 ft. increments), Adjustable Salinity Compensation from 0 to 50 ppt and an analog bargraph for indicating trends. DO600 meter includes a DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 3V CR-2032 batteries, and 48" (1.2m) neck strap.

Extech DO600-K

Waterproof ExStik® II Dissolved Oxygen Meter Kit

The DO600-K is a convenient kit which adds versatility for measuring dissolved oxygen in laboratories or out in the field with a 16-Foot (5m) extension cable and probe weight guard for taking easy measurements in tanks or streams. Complete with ExStik® II DO meter, DO electrode, protective sensor cap, DO603 replacement membrane Kit, 16-Foot (5m) extension cable, weighted probe guard, four 3V CR-2032 batteries, 48-Inch (1.2m) neck strap, and hard carrying case.